Herwecks Ulano Emulsions

Orange is a ready-to-use SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing. It is formulated with a “masking color” that reduces light scattering—the major cause of loss of resolution. With Orange, it is possible to use less costly white mesh without the closing up of fine lines and details. Despite its anti-halation color, Orange is ultra-fast-exposing! It is perfect for shops with high stencil making throughput, as well as shops with fluorescent tubes or other low-intensity light sources. Orange has high viscosity (6,000 – 8,000 centipoise) that improves control when coating screens by hand and makes it a good choice for coarse mesh. Its high solids content (44 - 46%) results in better mesh bridging and edge definition, and fast drying. Orange resists plastisols, most washup solvents, and some water-based textile inks, and it is easy to reclaim. Orange stencils are durable, will not become tacky under high humidity conditions, and have excellent wet strength and exposure latitude. Orange reduces stencil-making time—in coating (because of its high viscosity), drying (due to its high solids), and exposure (due to its high photo-sensitivity despite its “masking color.”

Ulano Orange

Ulano QX-1

Ulano QTX

Ulano 925WR-P

RLX is a multi-purpose high speed diazo photopolymer direct emulsion. RLX's very high solids content provides better stencil build per coat, excellent bridging of coarse mesh, and faster drying. RLX has superb coating properties and durability, and is resistant to a wide variety of solvent- and water-based ink systems. RLX is recommended for imprinted sportswear, P-O-P, and advertising specialty printing. Magenta color.

Ulano RLX

Ulano Emulsions

QX-1 is an SBQ sensitized, hybrid dual-cure emulsion that combines the convenience and shelf life of SBQ with the durability, versatility, and imaging properties of dual-cure emulsion.

QX-1 is compatible with all plastisol, UV, and solvent

based ink systems. Its matte finish virtuallyeliminates printing problemsassociated with high andlow

humidity conditions.

QX-1 is formulated to provide

wide exposure latitude and

is easily reclaimed even if underexposed

and used with aggressive inks and washup solvents.

QX-1 is durable and has excellent resolution, good definition, and very good wet strength. 37% solids content provides good stencil build per coat, excellent bridging of coarse mesh, and fast drying.

QX-1 is presensitized, and must be handled in yellow safe light conditions before exposure.

QTX is a ready-to-use, ultra-fast exposing SBQ photopolymer direct emulsion formulated for imprinted sportswear applications. QTX's high solids content provides superior coating properties, better bridging of coarse fabric, and fast drying. QTX resists plastisol and water-based inks, is also extremely durable, and reclaims easily. Do not subject to strong solvents during printing or wash-up. Pink color.

925WR-P is formulated for textile water base inks, it shares the main characteristics of Ulano's TZ emulsion, but with a higher solids content and similar resolution, edge definition and exposure latitude. Stencils produced with 925WR-P are completely water resistant and very durable.

925WR-P comes with a powder diazo-sensitizer, for faster and surer mixing. Emulsion color is pale violet.